Injection Molding Quote Online

We support mainstream injection molding project file formats (it is recommended to be as complete as possible for more accurate quotations):

• 3D: STEP / STP (recommended), IGES / IGS
• 2D: PDF, DWG, DXF (recommended to include key dimensions, tolerances, surface requirements)
• Compressed package: 3D + 2D + BOM + reference pictures can be packaged at the same time

It is recommended to provide STEP + 2D drawings (including tolerance/appearance requirements) first to facilitate automatic DFM and mold opening evaluation.

Injection molding costs generally consist of two parts:

• Mold cost: Related to structural complexity, mold steel, number of holes, slider/inclined roof and other mechanisms
• unit price: Related to material, weight, molding cycle, quantity, surface/assembly requirements

A common practice is to "open the mold and test it first to confirm the sample → then mass produce according to the quantity", which makes the cost split clear and the decision-making more controllable.

Supports low-volume pilot production and rapid prototyping. Common scenarios include:

• Trial prototype: verify size, assembly, appearance and structural strength
• Low-volume production: used for trial marketing, trial assembly, functional verification or phased delivery
• Mass production ramping: gradually increase volume after confirming the process window

The minimum order quantity is related to the product structure, materials, number of cavities and delivery time requirements; we will give a recommended plan after uploading the drawings.

Injection molding tolerances are related to material shrinkage, structural dimensions, mold accuracy and molding conditions. Usually:

• Conventional structural parts: typical ±0.05–0.10mm (depending on size range and material)
• Key dimensions of assembly/sealing: key controls can be carried out (need to be marked on 2D drawings and reviewed for confirmation)
• Thin-walled/large-sized/high-shrinkage materials: need to be adjusted in combination with DFM and mold trial results

If there are critical assembly dimensions, tolerance zones or GD&T, please mark them in the drawings. Accessibility and inspection plans will be confirmed separately during the review stage.

Commonly used materials (examples) include:

• ABS, PP, PC, PA (nylon), POM, PMMA, TPE/TPU, etc.
• Optional modifications: glass fiber reinforcement, flame retardant (UL94), weather resistance, high temperature resistance, etc. (evaluated by project)

If you have compliance/certification requirements (such as food contact, RoHS/REACH, etc.), you can state it in the remarks and we will give suggestions based on material grade and process feasibility.

Material selection will affect shrinkage, appearance, strength and cost. It is recommended to provide usage and working environment (temperature/load/chemical exposure).

Injection molding projects are usually divided into two stages: "mold opening/mold trial" and "mass production":

• Mold manufacturing: 7–15 working days common (longer for complex structures/multiple institutions; expedited can be assessed)
• Trial mold and sample delivery: usually 1–3 working days (including trial mold and sample delivery)
• Batch delivery: determined according to quantity and production schedule (can support batch shipment)

If you have a clear node (trial assembly/commissioning/delivery), please indicate the expected date and quantity in the remarks, and we will provide the optimal delivery plan.

Yes. After uploading the drawings, an injection molding manufacturability (DFM) review will be conducted. Common ones include:

• Wall thickness and ribs: avoid shrinkage, warping, and stress concentration
• Draft angle and parting line: ensure controllable demoulding and appearance
• Gate location and flow: Reduce the risk of weld lines, air streaks and short shots
• Ejection/slider/inclined ejection: dealing with undercut and demoulding interference
• Tolerances and Assembly: Critical Dimension Control and Inspection Recommendations

All structural adjustment suggestions will be confirmed with you first, and design intentions will not be modified without authorization.

If there are high-risk points in the structure (such as undercuts, thin walls, large planes, sudden changes in thickness, etc.), we will:

• Mark risks and impacts (appearance, size, strength, yield, mold complexity)
• Provide options: adjust structure/increase slope/change gate/change material or add mechanism
• After you confirm, proceed to mold opening and mold testing.

The goal is to achieve stable mass production and consistency within controllable costs and delivery times.

support. After the mold opening is completed, a test mold will be produced to confirm:

• Critical dimensions, tolerances and assembly relationships
• Appearance defects (welding lines, shrinkage, silver streaks, air marks, etc.)
• Material and color/texture matching (if requested)

If optimization is needed, we will evaluate adjustment plans (such as process optimization or mold correction) based on the mold trial results and target requirements before entering mass production.

Just three steps:

• Upload 3D/2D files (STEP + 2D drawings recommended) and fill in material/quantity/appearance requirements
• Confirm DFM review and quotation plan (mold fee + unit price + delivery date)
• Mold opening, trial molding and sample confirmation → mass production → inspection, packaging and delivery

For faster evaluation: please add "estimated annual usage/first order quantity, material grade or performance requirements, color/texture, assembly method, expected delivery date" in the remarks.